940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Overdrive Unit, M/T: Service and Repair
Disassembling Overdrive
NOTE: They are two types Of overdrive, type J and type P.
1. Clamp overdrive rear end in a vice protected by soft laws
2. Remove solenoid valve. Use crow-foot wrench P/N 5172. Disconnect ground wire.
3. Remove bridges, front and rear housing nuts.
NOTE: Last two nuts removed should be opposite each other. Loosen the nuts stepwise.