C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
On the open type the cable terminals core crimp is U-shaped. The cable is inserted in the core wings from the top. The crimp tool then applies a roll
crimp to the contact during crimping.
This type normally has insulation wings.
The illustration shows a cross section of a terminal crimping using the crimp tool from repair kit p/n 981 4235 Replaced by 9512644 See: Tools and
Equipment/981 4235 Replaced by 9512644 , which is described in the following Choice of crimp tool See: Terminal Crimping/Choice of Crimp Tool.
Core wings and insulation wings
The cable terminal crimping section consists of two parts which are formed simultaneously in the crimp tool.