C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
the half moon clips on the front-rear channels.
-
the half moon clips on the lateral channel.
-
Replace the upholstery.
Installation
-
In reverse order.
-
Position and measure the upholstery before securing.
-
Use special pliers, P/N 115 8962 to secure the half moon clips
NOTE: When hooking the upholstery to the clips, ensure that the steel rod is not pulled up out of the foam padding. Also ensure that the steel rod
in the upholstery does not bend excessively. There is a risk of comprehensive deformation. This will result in loose and unattractive upholstery.
Upholstery, Head Restraint, Front Seat, Replacing
Upholstery, head restraint, front seat, replacing
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparations
NOTE: A zip fastener catch is required to carry out this work. This is not included with the upholstery but is ordered separately.
Removing upholstery
