C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Make sure that brake discs and rin contact surfaces are clean.
-
Grease hub center rim guide with anti-rust agent 116 1038-3.
-
Install wheel
-
Tighten bolts handtight. Then tighten them crosswise to 110 Nm (80 ft.lb) If using air gun, use torque socket 115 8147.
NOTE: Tightening bolts crosswise to a specific torque setting is important in preventing stresses in the brake disc.
Rear Brake Pads
Brake Pads Rear, Replacement
Special Tools: 115 8147, 999 2809, 999 2917
Minimum thickness
Replacement point = 2.0 mm
Preparations
Remove wheel.
Removal of brake pads