volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 7263 > < Procedures|Page 7261
Page 3
background image

Right-hand drive car:

-

install the glove compartment.

-

After replacement, self-adjustment of the motors must be carried out

-

Check that no diagnostic trouble codes (DTCs) have been stored while the repair was carried out.

Replacing Temperature Damper Motor

Replacing driver's side temperature damper motor 

Removing 

-

Remove the soundproofing panel.

-

Remove the knee bolster if applicable

-

Remove vacuum regulator of the cruise control.

-

Disconnect the driver's side temperature damper motor connector 

-

Remove the driver's side temperature damper motor.

Procedures|Page 7263 > < Procedures|Page 7261