C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
An example of an incorrect working method
The locking tab may be damaged if the terminal removal tool is inserted in the cavity before the cable has been pushed forwards. The cable terminal
could then be difficult to extract.
In the illustration beside, there is not room for the locking tab to be pressed down by the terminal removal tool. The locking tab is pressed down by the
tools towards the stop lug. It bends into a shape that will lock it in position.
When the Cavity Opening Has Two Extraction Grooves
When the cavity opening has two extraction grooves
Terminal removal tool, P/N 9814228
Use pointed, pincer type terminal removal tool, P/N 9814228.
This terminal removal tool is used for cable terminals with two locking tabs: