C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
For a single row of cavities the terminal removal tool is inserted in the open groove on the upper side for each terminal.
Press the cable terminal forwards in the cavity.
Insert the terminal removal tool end between the cable terminal locking tabs and extract the cable terminal.
Double cavity row
For a double cavity row the terminal removal tool is inserted from the contact side in the upper row of cavities for the terminal to be extracted.
The lower cavities are used to fasten the cable terminals in place.
Press the cable terminal forwards in the cavity.
Insert the terminal removal tool and extract the cable terminal.
Proceed to
-
Proceed to chapter New cable terminal See: Replacing Cable Terminals/New Cable Terminal Seal sws and plug See: Replacing Cable
Terminals/Seal SWS and Plug for instructions about how to crimp a new cable terminal.
Housings With Round Cavity Opening