C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
The broader ends are 1.6 mm wide.
Press the cable terminal in the cavity forwards as far as it will go. This will free the locking tab from the cavity catch.
Insert the terminal removal tool in the groove over and under the cable terminal. Extract the cable terminal.
Always follow the instructions in Using terminal removal tools See: Extracting the Cable Terminal From the Housing/Using Terminal Removal Tools.
These instructions give the correct working procedure.
-
Proceed to chapter for New cable terminal See: Replacing Cable Terminals/New Cable Terminal Seal sws and plug See: Replacing Cable
Terminals/Seal SWS and Plug instructions about how to crimp a new cable terminal.
Cavity Opening With One Extraction Groove
Cavity opening with one extraction groove
Terminal removal tool, p/n 9814229
A terminal removal tool p/n 9814229 with a single blade type tip must be used.
This terminal removal tool is used for cable terminals with one locking tab: