C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Reconnecting
The connector halves are physically located with a guide pin.
Always turn the connector halves to the correct position when reconnecting.
Check that connector halves lock properly into each other.
Secondary Locking
Secondary locking
The cable terminals are retained in the housing cavities by different forms of primary locking and secondary locking.
This chapter describes how the different secondary locking systems on housing types are opened.
If there is no secondary locking on the housing this chapter can be ignored.
Secondary locking
There are housings with and without secondary locking.
In order to decide if the housing has secondary locking and if it has of which type, refer to the housings illustrated at Secondary locking - socket type
See: Open the Connector/Secondary Locking - Socket Type , When secondary locking is of the lid type See: Open the Connector/When Secondary
Locking Is of the Lid Type and When secondary locking is of the cavity cover type See: Open the Connector/When Secondary Locking Is of the Cavity
Cover Type.
Housing with secondary locking