volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Global Positioning System Module|Description and Operation|Page 37 > < Computers/Controls - CEM Recovery after SWDL Interrupt|Page 33
Page 1
background image

Global Positioning System Module: Description and Operation

Diagnostic functions 

General 
The control module has a built-in diagnostic system, the Volvo on-board diagnostic (OBD) system, which continuously monitors itself and its input and
output signals.

Diagnostic trouble codes (DTCs) 

If the control module detects a fault it will store a diagnostic trouble code (DTC). The control module can store up to 11 diagnostic trouble codes
(DTCs).
If for some reason a fault disappears after the diagnostic trouble code (DTC) has been permanently stored in the control module, information about the
fault is stored in the control module.

Reading off Volvo on-board diagnostic (OBD) system 

Global Positioning System Module|Description and Operation|Page 37 > < Computers/Controls - CEM Recovery after SWDL Interrupt|Page 33