C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Select the crimping insert for the cable terminal type. See Choice of crimp tool See: Terminal Crimping/Choice of Crimp Tool
-
Locate the cable terminal correctly in the crimping insert.
Check that the cable terminal deformation sections (1) and (2) are in contact with the crimp tool support section (3) and (4). The cable terminal must not
be at an angle or lie to far forwards or to the rear in the crimp tool insert.
-
Carefully apply pressure to the crimp tool until the jaws hold the cable terminal in place without applying sufficient pressure to deform it.
Check the cable terminal is correctly located in the crimp tool jaws
If the cable terminal is not correctly located