C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Lift the steering gear into place from the left.
-
Suspend the steering gear from the rear engine mounting.
-
Hold up the steering gear so that it hangs straight in relation to the frame. Tighten the engine mounting bolt to 50 Nm.
-
Align and attach the steering gear to the steering column universal joint.
-
Fit a new locknut on the steering column universal joint. Tighten to 20 Nm.
-
Fit the locking eyebolt.
-
Attach the oil pipes loosely to the steering gear. Use new O-rings.
-
Fit the front bracket for the oil pipes (loosely).
-
Line up the pipes with the bracket on the steering gear. Tighten the oil pipes in the steering gear to 25 Nm.