volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Steering Shaft > < Procedures|Page 6915
Page 19
background image

Fill the servo reservoir with oil and bleed the system.
Oil grade, see specification  Steering .
Turn the steering wheel from lock to lock repeatedly. Top off with oil as necessary.
Lower the car.
Apply the parking brake. Start the engine.
Check the oil level while bleeding the system as described below.
 A. Turn the steering wheel slowly to the right, hold it at full lock for 10 seconds.
 B. Turn the steering wheel slowly to the left, hold it at full lock for 10 seconds
Repeat steps  A and  B 20 times. Move the car after 10 times to avoid damaging the tires.
Check toe-in.  Toe-in .

Steering Shaft > < Procedures|Page 6915