C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Remove:
-
the mounting screws for the anti-roll bar
-
the anti-roll bar.
Installation
NOTE: Ensure that there is no exhaust leakage.
Install the new anti-roll bar
-
Install the screws using new nuts 2,3. Use a new screw and nut
-
Do not tighten the screws yet.
Install the transverse arm mounting on the trailing arm. Use new screws and nuts
-
Install the inner screw (1) and the nut. Adjust the mounting using the markings (2) made earlier. Tighten the nut so that the position is fixed. Install
the screw (3) and the nut.
-
Tighten the nuts. Tighten to 50 Nm. Angle tighten to 120 degree.
Use bevel protractor 951 2050.
Tighten the mounting screws for the anti-roll bar