C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Wipe the pressure plate friction area clean.
Check any out-of-true carefully. Use a ruler and a feeler gauge. Out-of-true is permitted in one direction only.
Out-of-true must not exceed 0.2 mm . If out-of-true is greater, replace the clutch.
The clutch must be replaced as a complete unit.
Checking the clutch driven plate
Wipe off clutch driven plate using a dry cloth. The cloth must be free of oil and contaminants.
Check the clutch carefully for signs of wear, damage through overheating, cracking or other damage.
Note! The clutch driven plate must always be replaced if there are no radial ripples remaining on the friction coating. The clutch driven plate
must also be changed if there is oil or grease on it.
Checking that there are no cracks or large scratches on the flywheel
To replace the flywheel, see Flywheel, replacement, M56 See: Flywheel/Service and Repair.
Installation
Installing the centering tool for the clutch driven plate