C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Turn the constant velocity joint's inner ring and bearing race and remove the ball bearings clockwise one at a time. Use the etching as a starting
point for removal.
-
Place the ball bearings in order so that they can be reinstalled in the same positions.
Remove the bearing race and the inner ring from the shaft.
-
Turn the inner ring 90° in relation to the bearing race.
-
Remove the inner ring.
-
Remove the lock ring from the inner ring.
Wash the constant velocity joint components thoroughly.