volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Alignment|Page 35788 > < Alignment|Page 35786
Page 4
background image

If the camber angle is outside these parameters check that the trailing arms are not damaged.

Toe In 

Check that the instruments on the front and rear axles are aligned. This is important as it allows toe in to be checked/adjusted in relation to the
symmetrical axis of the car. Correct value 0.07° (4.2') measured over both wheels. Maximum deviation 0.09° (5.4') per wheel.

Alignment|Page 35788 > < Alignment|Page 35786