volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Alarm System Transponder > < Procedures|Page 27410
Page 6
background image

Ignition off.

Remove: 

-

driver's side soundproofing panel.

-

control module with a screwdriver.

-

connector from control module.

Installation 

Note! Only new keys can be used. All old keys are no longer useable. 

Check that no pins or sockets are damaged on the connector.
Install in reverse order.
Initiate the control module in the Data Link Connector (DLC).

Alarm System Transponder > < Procedures|Page 27410