volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 28236 > < Procedures|Page 28234
Page 3
background image

Ignition off.

Remove: 

-

driver's side soundproofing panel. 

-

control module with a screwdriver. 

-

connector from control module.

Installation 

NOTE:  Only new keys can be used. All old keys are no longer useable.

Check that no pins or sockets are damaged on the connector.

Install in reverse order.

Initiate the control module in the Data Link Connector (DLC).

Replacing Control Module Security Strap

Replacing control module security strap 

HINT:  On a number of variants, as part of the anti-theft protection on cars with immobilizer, the control module box is locked with a security strap. The
locking strip is installed with a security screw.

Removal 

Procedures|Page 28236 > < Procedures|Page 28234