volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Roof Lining|Page 29221 > < Replacing the Roof Lining|Page 29219
Page 3
background image

Hint: If sun visor and wiring are fault-free, cut the wiring at a suitable place so a 2-pin connector can be installed.

Remove: 

-

A-pillar panel as described in Replacing panels See: Trim Panel/Service and Repair/Replacing Panels 

-

6 screws from glovebox and lift out

Note! Left sun visor: Remove sound wall under steering wheel to reach wiring. 

Remove connector from sun visor.
Cut wiring between sun visor and connector (A).

Hint: Let wiring which is tightly wound in cable harness remain there.

Remove sun visor.

Removing clips, roof lining 

Replacing the Roof Lining|Page 29221 > < Replacing the Roof Lining|Page 29219