C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Nozzle types
Spot blaster
The gun has seven revolving suction nozzles which have been developed with the help of experienced vehicle painters. The various nozzles seal against
all the difficult edges and corners of the car.
The suction nozzles are manufactured of a special rubber which tolerate long blasting times. They prevent dust and dirt from being spread in the
premises as well as protecting the paint beside the rust damage.
It is important that only the rust is removed because the original car paint is stronger than any paint repairs.
Note! Sand blasted areas should be sanded with P280 sandpaper and blown with compressed air. This is done to all sand blasted areas.
Note! A blasted surface corrodes very easily. The surface should not be exposed to damp and should be primed as soon as possible.
Masking