volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Radiator Support|Service and Repair|Page 29952 > < Paint Repairs To the Bottom Swell|Page 29948
Page 1
background image

Radiator Support: Service and Repair

Front section 

Replacing the front section 

Remove: 

-

the three screws in the fan shroud

-

two screws on each side of the front fenders.

Remove: 

-

the three mounting screws on the radiator member

-

the connector

-

the washer hose.

Install (on the front section): 

-

the wiper motors

-

the cable harness

-

the bulbs

-

the horn.

Screw the front section into place on the car.

Note! Check the height on both sides so that the front section does not rub against the side member. 

Replacing the front fender 

Radiator Support|Service and Repair|Page 29952 > < Paint Repairs To the Bottom Swell|Page 29948