volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sunroof / Moonroof Weatherstrip|Service and Repair|Page 30012 > < Sunroof / Moonroof Weatherstrip|Service and Repair|Page 30010
Page 3
background image

-

Position the weatherstrip joint in the middle of the rear edge of the sun roof. Cut off excess weatherstrip using scissors (P/N 998 6006-6). 
CAUTION:  Use sharp scissors of the correct type so that the cut is smooth and straight. This will provide good adhesion for the bonded joint.

Bonding the weatherstrip 

-

Bond both ends of the weatherstrip together tightly using adhesive (P/N 1161095-3).

Removing the seal lip from the weatherstrip 

Sunroof / Moonroof Weatherstrip|Service and Repair|Page 30012 > < Sunroof / Moonroof Weatherstrip|Service and Repair|Page 30010