C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Note! When removing the old fastener hold the inner section (1) of the panel mounting so that it does not fall between the panel and the
car body.
-
Remove the old fastener with the screws and clip. The mounting socket and clip will not be reused. Tighten the new fastener (from the kit) using
the existing screw.
Note! There are separate fasteners in the kit for the right and left-hand sides.
Applies to the left and right-hand sides
-
Reinstall the panel. Ensure that the two clips at the front edge are secured properly
-
Press the moulding into the rear edge / upper edge of the panel
-
Tighten the panel using the screw at the front edge / upper edge
-
Reinstall the seat belt panel. Tighten the panel using the screw. Reinstall the cover
-
Fold the link arm back into the mounting for the mechanism for the side panel hatch
-
Reinstall the seat cushion
-
Reposition the front seats
-
Reassemble the cover for the roof storage space
-
Continue with points to.
