C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Remove the four screws.
-
Open the drive gear housing.
-
Replace cable. Check the new cable has the correct part number.
-
Fill drive gear housing with grease if necessary, P/N. 116 1241-3 .
Reinstalling
Install in reverse order.
-
Check the cable is straight where secured in proximity to the connections to the motor and drive gear.
-
When installing the impact protection: check that the impact protection is not contacting the SIPS airbag's gas generator.
SIPS airbag, removing the safety device
Remove the transport safety device from the sensor module and return it to its storage place on the inside of the control panel.
Backrest Upholstery, Replacement
