C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Note! Both strip and vehicle should be at room temperature.
Clean the inside of the strip with Cleaner H (component number 1161436-9).
Coat rear side of strip with primer (component number 1161516-8).
Start by installing strip in rear edge.
Remove one piece of protective tape at a time on sealing strip and press strip firmly in place, if new strip has been installed.
Note! Make sure there is a straight line along the body.
Caution! It is important that pressure is applied to the strip to ensure the tape makes full contact with the body.
Replacing fabric strip
Removing fabric strip
