volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 23879 > < Procedures|Page 23877
Page 7
background image

-

Remove the brake pads and shims. Use puller  999 2917 EXTRACTOR  See: Tools and Equipment/999 2917 Extractor  if the brake pads are
difficult to remove.

Cleaning and checking 

-

Clean the brake pad contact surfaces in the brake caliper.

-

Check the piston's dirt cap.

-

If the dirt guard looks worn, replace it as a precautionary measure.

-

If the dirt guard is damaged, overhaul the brake caliper. See  Brake caliper rear, overhaul See: Brake Caliper/Service and Repair/Overhaul/Brake
Caliper Rear, Overhaul.

Note! If the dirt guard is damaged, dirt may have penetrated into the cylinder and the brake caliper must be overhauled. 

Procedures|Page 23879 > < Procedures|Page 23877