volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 23901 > < Procedures|Page 23899
Page 3
background image

Note! Cleaning is important to prevent lateral run-out in brake disc. 

-

Make sure that hub flange is clean. Remove rust with a steel blade and steel brush.

-

Check hub.

-

If hub is damaged, measure hub lateral run-out as per  Measuring lateral run-out in hub See: Maintenance/Wheels and Tires/Wheel Hub/Testing
and Inspection.

Installing brake disc 

Note! Handle new brake disc with care. Careless handling can cause damage (e.g. twisting). 

-

Install new brake disc. Tighten locating pins (and bolt) to 8 Nm (6 ft.lb).

Procedures|Page 23901 > < Procedures|Page 23899