C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Undo parking brake adjusting screw until brake disc can be removed. Access the adjusting screw by turning the brake disc until the adjustment
hole is centrally over the adjusting screw which sits between the brake shoes.
-
Unscrew locating pin and remove brake disc.
Cleaning and checking
Note! Cleaning is important to avoid lateral run-out in the brake disc.
-
Make sure that hub flange is clean. Remove rust with a steel blade and steel brush.
-
Brush off any dirt on pulse wheel and wheel sensor with a soft brush.
-
If hub is damaged, measure the hub lateral run-out as per Measuring lateral run-out in hub See: Maintenance/Wheels and Tires/Wheel
Hub/Testing and Inspection.
Installing brake disc
Note! Take care when handling the new brake disc. Careless handling can cause damage (e.g. warping).
-
Install new brake disc on hub.
-
Install locating pin and tighten to 8 Nm.
