volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 24026 > < Procedures
Page 2
background image

-

Remove the two cover panels, one under the Handbrake lever and the other under the armrest.

-

Remove the four console bolts.

-

Undo the connectors at the front of the console.

Cars with manual gearshift:

-

Undo gearshift gaiter from tunnel console by pressing on gaiter's rear snap fastening from underneath through the hole under the parking brake
lever.

-

Lift rear end of console first and press it forwards until the parking brake lever comes free of the console cross member.

-

Now lift front edge and remove console.

Removing cable 

-

Remove rear wheel.

-

Remove cable clip mounting bolt located in front of rear wheel arch.

-

Remove cable clip and rivet on carrier arm.

-

Undo cable from carrier arm end piece by bending cable cover guide sleeve up and down moderately.

-

Remove cable rear end from grip on expander.

Procedures|Page 24026 > < Procedures