volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 24049 > < Procedures|Page 24047
Page 4
background image

-

Install brake disc on hub in line with mark on hub.

-

Install locating pin and tighten to 8 Nm (6 ft.lb).

-

Install brake caliper with new bolts. Tighten to 60 Nm (45 ft.lb).

-

Install brake pipe in brackets.

-

Install three way connector mounting bolt, (LH brake caliper only).

Adjusting parking brake 

-

Refer to Parking brake and complete procedure as per instructions there. See: Service and Repair/Procedures

Procedures|Page 24049 > < Procedures|Page 24047