C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Protective cap from bleed nipple by LH front wheel.
-
Connect hose to drain bottle.
-
Open bleed nipple, depress brake pedal and hold it down or lock it in that position.
-
Close bleed nipple.
-
Remove EBD pressure sensor and plug connector so that no dirt enters the braking system.
Check EBD pressure sensor
The EBD pressure sensor comes with different seals between it and the master cylinder:
-
O-ring
-
Captive washer
-
Conical seal
-
Check that there is no dirt in the EBD pressure sensor connector.
Installing new EBD pressure sensor
-
Install EBD pressure sensor.Tighten to 15 Nm (10.3 ft.lb).
-
Connect connector to EBD pressure sensor.