C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Install
-
new sealing rings in the oil pan
-
the oil cooler. Tighten
-
the oil filter.
Installing the rear crankshaft seal
Use standard handle 999 1801 STANDARD SHAFT See: Tools and Equipment/999 1801 Standard Shaft and drift 999 5676 Drift replaced by
9997174 See: Tools and Equipment/999 5676 Drift Replaced by 9997174.
Lubricate the drift face and thread the sealing ring onto the drift.
Tap in the seal until the drift bottoms against the block.
