C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Remove
-
the control module box air baffle.
-
the cover plate over the injectors.
-
injector connectors.
-
the connectors for the sensors in the plastic charge air pipe between the charge air cooler (CAC) and the throttle body (TB).
-
the cover over the ignition coils.
-
Separate the connector for the electronic throttle body (TB).
-
Separate the charge air pipe at the hose/plastic pipe.
-
Remove the plastic charge air pipe. Seal the opening.
-
Mark up and remove the vacuum hoses from the intake manifold.
-
Remove the cover over the ignition coils.
-
Remove the hose from the flame trap to the cam cover at the terminal in the cam cover.
-
Remove the mounting screws from the fuel rail.
-
Separate the fuel line quick-release connector.
-
Use tool 951 2666.
-
Spray universal oil or similar around the injector nozzle at the terminal on the intake manifold.
-
Gently work the fuel rail and injector nozzles loose.
Removing the intake manifold and gasket.
-
Remove
-
the dipstick bracket.
-
the lower screws for the intake manifold a few turns.
-
Remove
-
the mounting screws in the upper row and the outer screws in the lower row.
-
the intake manifold by lifting it approximately 20 mm.