volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 6541 > < Procedures|Page 6539
Page 12
background image

-

the air hose from the air cleaner (ACL) to the turbocharger (TC). Place to one side.

Seal the hose.

-

place the air cleaner (ACL) cover to one side.

-

the charge air pipe over the engine.

Seal the openings.

-

the cover over the ignition coils.

-

the upper torque rod bracket.

-

the camshaft position (CMP) sensor housing.

-

the trigger wheel.

Replacing the rear camshaft seal 

 Remove and replace the seal: 
Carefully pull out the old seal.
Use extractor  999 5919 PULLER  See: Tools and Equipment/999 5919 Puller.

Replacing the rear camshaft seal 

Procedures|Page 6541 > < Procedures|Page 6539