volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Exhaust Manifold Gasket > < Engine - Rear Main Seal Replacement|Page 6553
Page 5
background image

-

Install the other screws. Tighten.

-

Replace the 3 special screws with new standard screws. Tighten.

-

Then angle-tighten all 10 screws crosswise. Use 951 2050. Tighten.

-

Ensure that the flywheel sensor and bracket are installed. Install the clutch driven plate and clutch.

Installing The Transmission 
Install The Transmission

Checking The Engine: 
Test drive the car to check the function of the engine and the transmission.

Exhaust Manifold Gasket > < Engine - Rear Main Seal Replacement|Page 6553