C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
charge pressure (red-marked).
-
relief valve (white-marked).
-
pressure box (yellow-marked).
Remove:
-
turbocharger.
-
the old studs from the exhaust manifold.
Remove the nuts that hold the manifold to the cylinder head.
Lift up the manifold.
Clean the gasket surfaces and check that all studs are tightened.
Install new gaskets.
Install the manifold. Use new nuts
and tighten with 25 Nm .
Install:
Note! For tightening torques, see: Tightening torque, B5234T9 See: Specifications/Mechanical Specifications/Tightening Torque.
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Exhaust System/Exhaust Pipe/Service and Repair.