C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Install the upper camshaft belt cover.
-
Check that the markings on the crankshaft and camshaft timing gear pulley correspond.
Install The Belt In The Following Order:
1. crankshaft
2. idler pulley
3. intake camshaft
4. exhaust camshaft
5. water pump
6. belt tensioner
Tighten The Timing Belt
-
This adjustment must always be made on a cold engine.
-
The correct temperature is approximately 20 degree C / 68 degree F.
-
At higher temperatures, for example with engine at operating temperature, the indicator is further to right.
-
The position of the indicator when aligning the camshaft belt tensioner at different temperatures is shown in the figure.
-
Turn the crankshaft clockwise carefully until the camshaft belt is tensioned.