volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 6576 > < Procedures|Page 6574
Page 8
background image

Install the wheel.

Finishing 

Install: 

-

the front camshaft belt cover.
-

Tighten to 12 Nm (8.8 lb.ft).

-

the upper camshaft belt cover.

-

the auxiliaries belt.

-

the expansion tank and servo reservoir.

NOTE:  Ensure that the hoses are correctly positioned.

Carry Out A Function Test 

-

Check the oil level and top up if required.

-

Start the engine.

NOTE:  Check that there is no leakage.

-

Stop the engine and give the oil time to run down into the oil trough.
-

Then check the oil level.

-

Top up if necessary.

NOTE:  Check again that there is no leakage.

-

Wipe the engine compartment clean.

-

Ensure that the steering wheel and gear selector lever are clean.

Procedures|Page 6576 > < Procedures|Page 6574