C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Install counterhold 999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold.
-
Counterhold and remove the crankshaft center nut.
-
Work the vibration damper loose and remove by hand.
-
Remove the timing belt.
Remove the crankshaft timing gear pulley
-
Use a universal puller 998 6187 UNIVERSAL PULLER 100 See: Tools and Equipment/998 6187 Universal Puller 100 and two of the vibration
damper screws.
-
Tighten both the screws by hand to stop in the pulley.
-
Install puller so that the claws are on the screws, not in the camshaft pulley.
Note! Ensure that the tool claws do not damage the pulley teeth.
When replacing the front crankshaft seal
