C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Note! Take great care so that the sealing ring in the oil pump is not damaged during installation.
-
Carefully tap in the oil pump with a rubber mallet.
-
Tighten the screws crosswise to 10 Nm (7.4 lb.ft) .
-
Install the crankshaft timing gear pulley.
Carefully tap alternately around the wheel until end position is reached.
Note! The timing gear pulley can only be in one position on the crankshaft end splines.
Install the vibration damper
-
Install the new camshaft belt over the crankshaft pulley wheel.
-
Install the vibration damper.
-
Tighten the center nut to 180 Nm (133 lb.ft) .
-
Use counterhold 999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold.
-
Remove the counterhold and install new screws.
Tighten the screws to 25 Nm (18 lb.ft) .
Angle-tighten 30° .
Use bevel protractor 951 2050.
Install the camshaft belt
