C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Removing the intake manifold and gasket
Remove
-
oil dipstick's bracket.
-
the lower screws for the intake manifold a few turns.
Remove
-
the mounting screws in the upper row and the outer in the lower row.
-
the intake manifold by lifting it approximately 20 mm
Allow the crankcase ventilation hose to run through the intake manifold without disconnecting it from the flame trap.
Transferring components when replacing the intake manifold
Note! For tightening torques, see: Tightening torque, B5234T9 See: Specifications/Mechanical Specifications/Tightening Torque.
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Exhaust System/Exhaust Pipe/Service and Repair.