C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Timing Belt Idler Pulley: Service and Repair
Replacing The Timing Belt/Idler Pulley/Belt Tensioner
Special Tools: 999 5433.
NOTE: As the illustrations in the information are used for different model years and/or models, certain variations may occur. However, the essential
information in the illustrations is always correct.
Remove components
CAUTION: Remove the ignition key from the ignition switch before beginning work.
NOTE: The crankshaft or camshaft must not be rotated under any circumstances other than those listed below. Failure to follow these instructions may
cause damage to the valves.
Remove:
-
the upper timing belt cover.
-
the servo reservoir and the expansion tank.
Lift up and place on top of the engine.
NOTE: Take care not to spill servo oil from the bleed hole in the cap.
Place paper wipe around the reservoir and then cover with a plastic bag as protection.
Spilled servo oil is highly inflammable.
-
the auxiliaries belt.
-
the front camshaft belt cover.
Position The Engine According To The Marking
