C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Install the new camshaft belt over the crankshaft pulley wheel.
-
Install the vibration damper.
-
Tighten the center nut to 180 Nm (133 lb.ft).
-
Use counterhold 999 5433.
-
Remove the counterhold and install new screws.
-
Tighten the screws to 25 Nm (18 lb.ft). Angle tighten 30 degree.
Then Install The New Belt In The Following Order:
1. Idler pulley.
2. Intake camshaft pulley.
3. Exhaust camshaft pulley.
4. Water pump.
5. Belt tensioner.
Tighten The Timing Belt
-
This adjustment is to be made with a cold engine.
-
A suitable temperature is approximately 20 degree C / 68 degree F.
-
At a higher temperature, for example with a warm engine or a higher ambient temperature, the needle is further to the right.
