C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Raise the car.
-
Remove the right front wheel.
-
Remove the nut for the cover in the fender liner.
-
Install the upper camshaft belt cover.
-
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
-
Turn the crankshaft a further 1/4 turn clockwise and then back again until the markings correspond.
The markings are illustrated.
-
Remove the upper camshaft belt cover.
Removing the camshaft belt
Slacken off the belt tensioner
-
Slacken off the belt tensioner center screw slightly.
-
Hold the center screw still and turn the tensioner eccentric clockwise with a 6 mm (15/64") Allen key to "10 o'clock".
-
Remove the camshaft belt from the tension pulley, camshaft pulley and idler pulley.
Remove the vibration damper
