C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Press the variable valve timing unit/timing gear pulley onto the camshaft. Install the center screw (1) that holds the variable valve timing unit to the
camshaft. Do not tighten yet.
-
Slacken off, but do not remove the screws (2) which secure the timing gear pulley to the variable valve timing unit.
-
Position the upper timing cover.
-
Turn the timing gear pulley so that the screws at the oval holes are in the limit position. Continue turning clockwise until the timing gear pulley's
marking is 1 tooth before the marking on the upper cover.
-
Check that the timing gear pulley is still in the limit position in the oval holes.
-
Tighten the center screw (1) in the VVT unit to 120 Nm.