C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
3 nuts for the cable duct at the right suspension turret.
Lift the duct away from the screws.
-
the auxiliaries belt.
-
the front camshaft belt cover.
Position The Engine According To The Marking
-
Raise the car.
-
Remove:
-
the right front wheel.
-
the nuts for the cover in the fender liner.
-
Install the upper camshaft belt cover.
-
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
-
Turn the crankshaft a further 1/4 of a turn clockwise, then back counter-clockwise until the markings correspond.
-
The markings are shown in figure.
-
Remove the upper camshaft belt cover.
Removing The Camshaft Belt