C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Install new seals:
Grease and install the new seal.
Use drift 999 5450 PUNCH See: Tools and Equipment/999 5450 Punch.
Note! The seal is normally pressed in so that it is level with the internal beveled edge. If the shaft journal is showing signs of wear, the seal can
be pressed in 2 mm (0.079 in) deeper by turning the drift socket.
Reinstall
Install:
-
the trigger wheel.
Tighten to 17 Nm (12 lb.ft) .
-
the camshaft position (CMP) sensor housing and a new cover.
Tighten to 10 Nm (7.4 lb.ft) .
-
the torque rod bracket.
Tighten to 50 Nm (37 lb.ft) .