volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 7271 > < Procedures|Page 7269
Page 9
background image

-

Upper timing belt cover. Tighten to 8 Nm (6 lb.ft).

-

Front timing belt cover. Tighten to 12 Nm (8.8 lb.ft).

-

Install the auxiliaries belt.

-

Reinstall the servo reservoir and the expansion tank.

-

Ensure that the hoses are correctly positioned.

-

The cover in the fender liner.

-

The wheel.

Fill the cooling system with Volvo original coolant.

Wipe clean and check the engine compartment.

Checking Work 

Function Test 

-

Start the engine and run it until the thermostat opens.

-

Top up the cooling system if necessary.

Check for leaks.

Wipe the steering wheel and gear selector lever clean.

Procedures|Page 7271 > < Procedures|Page 7269