C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Brake Bleeding: Service and Repair
Bleeding Brakes With A Bleeding Unit
Bleeding brakes with a bleeding unit
Note! Bleeding braking systems with ABS takes longer than bleeding conventional braking systems.
Guidelines for bleeding
When overhauling or replacing brake calipers, it is usually enough to bleed the brake pipe concerned as below. One condition is that the brake pedal
must be depressed while working, so that the braking system is not drained of brake fluid. If the braking system has been drained, partly or completely,
the complete braking system should be bled using the bleeding unit.
Note! Use only Volvo original brake fluid marked DOT 4+. Never re-use brake fluid. Always keep brake fluid in its original packing, well
sealed.
Preparations
Ignition off.
Jack car up.
Clean filler cap on brake fluid reservoir and the surrounding area.
Remove:
-
Filler cap.
Set bleeding unit to 0.2-0.3 MPa (29-42.7 psi).
Connecting bleeding unit